|
 |

Author |
Message |
enerchron | Posted - 20 December 2002 10:47  After undergoing 23 years of extensive research, development and testing this unbelievable product is now available to solve your painting problems.
ENERCHRON V-40® (www.enerchron.com), a new type of interior/exterior building coating proven to be long lasting, energy efficient, graffiti and water resistant, fire retardant, and environmentally safe.
In Government tests it was reported that ENERCHRON® cut HVAC run time by 50% to 100% when applied to exterior building surfaces. It is able to keep exterior surface temperatures to just a few degrees above air temperatures. In essence, coating with ENERCHRON® is like putting a building in the shade. Maintenance costs are greatly reduced because it completely shields surfaces from the sun and the damaging effects of thermal shock. Rooftop HVAC units coated with this material have seen 20 to 60 percent increases in cold air performance, which reduces cycle time and extends unit life.
To date, there are buildings coated with ENERCHRON® 11 years ago, which still look freshly painted. This is one more important benefit to the environment because by reducing repetitive painting over the years, means less VOC's are emitted into the environment. In tests by the California South Coast Air Quality Management District it was reported that ENERCHRON®'s VOC's were rated 60 g/l, which means it is 4.2 times less toxic than typical latex house paint.
ENERCHRON® has increased lighting efficiency by 35% and customers claim that they "don’t need any interior lighting during the day at all". Indelible marker, spray paint, grease, crayons, dirt and more can be washed off walls with a nylon scrub pad and soap and water. ENERCHRON® is Class "A" fire retardant coating. It carbonizes at 2500°F and could make the difference between saving or losing a building in a fire.
It is applied like regular paint and can be used on interior, exterior walls and roof surfaces. ENERCHRON® is priced competitively with latex house paint at equal dry film thickness levels.
For more information, contact Helios Energy Products, Inc., P.O. Box 9 Diamond Springs, | dbrisson | Posted - 25 June 2000 1:36  I am interested in your product, please send information to my e mail best regards, dale brisson | lcomstock | Posted - 13 July 2000 16:30  Unbelievable is correct. A typical Manual J heat load for an isulated wall shows that the walls contribution to the entire heat load is under 15%. If the product total eliminated heat entering through the wall the energy benefit MAX is less than 15%. The benefits of coating an airconditioner are even more laughable.
| rklimovich | Posted - 16 August 2000 23:26  Dear Lynn:
We have 12 years of testing and proof of ENERCHRON's performance. What this product is able to do is reduce exterior surface temps. to a constant level of just 3 to 15 degrees F. above outside air temp., without gain due to normal surface dirt buildup. This can be as much as an 80 degrees. F. drop in overall delta T to the wall and roof (depending on location). As you know by dropping the delta T that much of a building or AC unit envelope will greatly effect temp. gain.
On rooftop HAVC units we have reduced total supply and return air temps a total of 7 to 15 degrees F. by dropping the delta T of the units housing. The temp. across the coil will remain the same. What happens is that the temp. curve of the coil drops, which has increased the cold air performance of the units from 20% to 60%.
I can understand your point of view Lynn, but it really works. I would be happy to provide you or anyone with test docs. s |
Show All Forums |
Post Reply
|